Metric Bolt Circle Layout
X and Y positions for every hole on a pitch circle (PCD), to drill on a CNC mill or by DRO without a rotary table, plus the angles for a rotary table or dividing head. Free, metric, no login.
No drawing for an existing pattern? Find its PCD from a caliper reading with the Bolt Circle PCD Calculator.
ΔX and ΔY are the moves from the previous hole, for incremental moves on a DRO. Check the first hole against the drawing before drilling.
Drilling code
Drill cycle at every hole position above. Z values are absolute.
Tool change, spindle start and coolant are left to you. Run the code through a simulator or a dry run before it cuts.
How it's worked out
Each hole sits on the pitch circle at its own angle. The angle steps from the start angle by the angle between holes, counter-clockwise or clockwise.
- Angle
- Hole n is at start angle ± (n − 1) × angle between holes, shown from 0 to 360° counter-clockwise from 3 o'clock, the way the machine's X and Y axes see it.
- Equal spacing
- Angle between holes = 360° ÷ number of holes.
- X, Y
- X = centre X + PCD/2 × cos(angle), Y = centre Y + PCD/2 × sin(angle).
- ΔX, ΔY
- The move from the previous hole, for incremental positioning.
- Chord
- Straight-line centre distance between neighbouring holes: PCD × sin(angle between holes ÷ 2). Measure it over two holes with a caliper to check the pattern, or work back from it to the PCD with the Bolt Circle PCD Calculator.
- Web
- Metal left between neighbouring holes: chord minus hole Ø. Under zero, the holes break into each other.
- Clockwise
- Some drawings number holes clockwise. Pick Clockwise and the numbering follows the drawing; X and Y stay in the machine's normal axes.
Common questions
How do I calculate the X and Y position of holes on a bolt circle?
For each hole, X = centre X + PCD/2 × cos(angle) and Y = centre Y + PCD/2 × sin(angle). With equal spacing the angle steps by 360° ÷ number of holes from the start angle. Six holes on a 100 mm PCD starting at 0°: hole 1 is X 50, Y 0, hole 2 is X 25, Y 43.301.
What is the distance between neighbouring holes on a PCD?
The chord, centre to centre: PCD × sin(180° ÷ number of holes). Six holes on a 100 mm PCD are 50 mm apart. Subtract the hole diameter to get the web of metal left between them.
How do I drill a bolt circle without a rotary table?
Work out the X and Y position of every hole from work zero and position to each on a CNC mill or with a DRO. The calculator writes a drill or peck cycle at every hole for HAAS/Fanuc (G81, G83) or Sinumerik (CYCLE81, CYCLE83).
Which way are the holes numbered?
By default counter-clockwise from 3 o'clock, the way the machine's X and Y axes see it. Pick Clockwise when the drawing numbers holes that way; X and Y stay in the machine's normal axes.
I have a part but no drawing. How do I find the PCD?
Measure across two holes with a caliper and use the Bolt Circle PCD Calculator, then open the layout from there with the PCD and hole count filled in.